China Xd-100c 2.2kw 3kw 100m3/H Rotary Vane Vacuum Pump pulley system

Merchandise Description

Item Description

Rotary vane vacuum pump mostly is composed of pump entire body, rotor, rotary vane, end cap, oil tank and so on. A rotor with 3 vanes is mounted eccentrically in a cylindrical housing, the 3 vanes slide in the rotor slots. When rotating, the centrifugal power retains the vanes in get in touch with with the housing and the rotation drives the rotor to slide together the housing.

1.Exhaust porti nterface 2.Exhaust filter 3.Suction valve
4.Oil degree gauge 5.Drain valve  6.Filler plug
7.Exhaust valve 8.Blade nine.Rotor
ten.Tank eleven.Axial supporter 12.Motor 
13.Oil filter 14.Suction port interface fifteen.Air ballast valve
16.Radiator tube 17.Return valve  

Working theory

The diagram below shows the construction of the pump. When the rotor rotates, the vanes, the housing and the 2 conclude caps form three chambers, each and every turn, the quantity of each chamber will increase or decreases because of to the sliding of the vanes, completing the suction and discharge procedure.

Major features

  1. Able to perform continually for a prolonged time underneath the inlet stress of 5×104Pa.
  2.  Low sounds, minimal vibration, foot bolts is not needed.
  3. Exhaust filter in the pump efficiently separates the oil in the gas to steer clear of pollution of the environment.
  4. Directly driven by motor.
  5. Compact structure, light-weight excess weight, air-cooled.
  6. Effortless to work, install and sustain.

Apps

The rotary vane vacuum pump is appropriate for the purposes the place the necessity of vacuum is not substantial and the procedure is reliable and servicing is handy. It is commonly utilized in vacuum packaging of different foodstuffs, vacuum forming of rubber and plastic business, paper transmission of printing sector, vacuum impregnation and leakage prevention of different castings, vacuum fixture, vacuum drying, vacuum filtration, and clinic surgical procedure.

Solution Parameters

 

Product Nominal pumping speed(50Hz)
 m³/h
Ultimate force
 ≤Pa
Supreme strain with Fuel Ballast valve on ≤Pa Nominal motor ranking (50Hz)   kw         Nominal motor speed  (50Hz) RPM  Water vapour potential
 kg/h
Sounds level   db(A) Oil potential
 L
Functioning Temperature
ºC
Suction Relationship dimensions
 inch
Discharge Link dimension
 inch
Weight
kg
XD-571 10 two hundred   .37 2800 .4 sixty two .5 77 G1/2″ G1/2″ sixteen
XD-571 20 200   .75 2880 .4 63 .five seventy seven G1/2″ G1/2″ eighteen
XD-571A 20 200   .seventy five 2880 .four 63 .five 77 G1/2″ G1/2″ 18
XD-571C twenty two hundred   .nine 2880 .four 65 .5 79 G3/4″ G3/4″ 20
XD-571 25 200   .seventy five 2880 .four 65 .5 79 G3/4″ G3/4″ 20
XD-040C forty 50 two hundred one.one 1500 .six 64 one.25 seventy six G1 1/4″ G1 1/4″ 48
XD-063C 63 50 two hundred one.5/2.2 1500 one sixty five 2 seventy nine G1 1/4″ G1 1/4″ fifty eight
XD-063D 63 fifty 200 1.5 1500 .six 65 1.five 79 G1 1/4″ G1 1/4″ forty nine
XD-100C 100 50 two hundred 2.2/three 1500 1.five 66 two seventy nine G1 1/4″ G1 1/4″ seventy two
XD-160C a hundred and sixty fifty two hundred 4 1500 two.5 71 five 70 G2″ G2″ 158
XD-202C 200 50 two hundred four 1500 four seventy three 5 70 G2″ G2″ 158
XD-250C 250 50 200 five.5 1500 4.5 73 7 73 G2″ G2″ 195
XD-302C 300 50 two hundred five.5/7.5 1500 5 seventy five seven seventy five G2″ G2″ 211

Dimensional drawing

 

 

Our factory

 

FAQ

Q: What data must I offer for an inquiry?
A: You can inquire based mostly on the model immediately, but it is usually advisable that you speak to us so that we can support you to examine if the pump is the most appropriate for your application.

Q: Can you make a custom-made vacuum pump?
A: Of course, we can do some unique types to fulfill consumer apps. This kind of as customized sealing techniques, speical surface remedy can be applied for roots vacuum pump and screw vacuum pump. Make sure you speak to us if you have particular needs. 

Q: I have difficulties with our vacuum pumps or vacuum techniques, can you provide some assist?
A: We have application and style engineers with far more than thirty several years of encounter in vacuum purposes in various industries and assist a good deal of consumers resolve their problems, this kind of as leakage concerns, energy-saving solutions, far more atmosphere-friendly vacuum methods, and so on. Please get in touch with us and we are going to be really happy if we can offer you any aid to your vacuum system.

Q: Can you design and style and make tailored vacuum methods?
A: Yes, we are great for this.

Q: What is your MOQ?
A: 1 piece or 1 set.

Q: How about your shipping time?
A: 5-10 functioning days for the common vacuum pump if the quantity is beneath 20 pieces, 20-30 working times for the conventional vacuum program with considerably less than 5 sets. For far more quantity or special needs, you should contact us to check out the guide time.

Q: What are your payment conditions?
A: By T/T, 50% progress payment/deposit and 50% compensated before shipment.

Q: How about the warranty?
A: We offer 1-yr warranty (other than for the wearing parts).

Q: How about the support?
A: We provide remote movie complex support. We can send out the support engineer to the internet site for some unique requirements.

US $1,008-1,210
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Video Instruction
Warranty: 1 Year
Nominal Pumping Speed(50Hz): 100m3/H
Ultimate Pressure(W/O Gas Ballast Valve): 0.5 Hpa
Ultimate Pressure (W/ Gas Ballast Valve): 2 Hpa
Nominal Motor Rating(50Hz): 2.2/3kw

###

1.Exhaust porti nterface 2.Exhaust filter 3.Suction valve
4.Oil level gauge 5.Drain valve  6.Filler plug
7.Exhaust valve 8.Blade 9.Rotor
10.Tank 11.Axial fan 12.Motor 
13.Oil filter 14.Suction port interface 15.Air ballast valve
16.Radiator tube 17.Return valve  

###

Model Nominal pumping speed(50Hz)
 m³/h
Ultimate pressure
 ≤Pa
Ultimate pressure with Gas Ballast valve on ≤Pa Nominal motor rating (50Hz)   kw         Nominal motor speed  (50Hz) RPM  Water vapour capacity
 kg/h
Noise level   db(A) Oil capacity
 L
Working Temperature
ºC
Suction Connection size
 inch
Discharge Connection size
 inch
Weight
kg
XD-010 10 200   0.37 2800 0.4 62 0.5 77 G1/2" G1/2" 16
XD-020 20 200   0.75 2880 0.4 63 0.5 77 G1/2" G1/2" 18
XD-020A 20 200   0.75 2880 0.4 63 0.5 77 G1/2" G1/2" 18
XD-020C 20 200   0.9 2880 0.4 65 0.5 79 G3/4" G3/4" 20
XD-025 25 200   0.75 2880 0.4 65 0.5 79 G3/4" G3/4" 20
XD-040C 40 50 200 1.1 1500 0.6 64 1.25 76 G1 1/4" G1 1/4" 48
XD-063C 63 50 200 1.5/2.2 1500 1 65 2 79 G1 1/4" G1 1/4" 58
XD-063D 63 50 200 1.5 1500 0.6 65 1.5 79 G1 1/4" G1 1/4" 49
XD-100C 100 50 200 2.2/3 1500 1.5 66 2 79 G1 1/4" G1 1/4" 72
XD-160C 160 50 200 4 1500 2.5 71 5 70 G2" G2" 158
XD-202C 200 50 200 4 1500 4 73 5 70 G2" G2" 158
XD-250C 250 50 200 5.5 1500 4.5 73 7 73 G2" G2" 195
XD-302C 300 50 200 5.5/7.5 1500 5 75 7 75 G2" G2" 211
US $1,008-1,210
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Video Instruction
Warranty: 1 Year
Nominal Pumping Speed(50Hz): 100m3/H
Ultimate Pressure(W/O Gas Ballast Valve): 0.5 Hpa
Ultimate Pressure (W/ Gas Ballast Valve): 2 Hpa
Nominal Motor Rating(50Hz): 2.2/3kw

###

1.Exhaust porti nterface 2.Exhaust filter 3.Suction valve
4.Oil level gauge 5.Drain valve  6.Filler plug
7.Exhaust valve 8.Blade 9.Rotor
10.Tank 11.Axial fan 12.Motor 
13.Oil filter 14.Suction port interface 15.Air ballast valve
16.Radiator tube 17.Return valve  

###

Model Nominal pumping speed(50Hz)
 m³/h
Ultimate pressure
 ≤Pa
Ultimate pressure with Gas Ballast valve on ≤Pa Nominal motor rating (50Hz)   kw         Nominal motor speed  (50Hz) RPM  Water vapour capacity
 kg/h
Noise level   db(A) Oil capacity
 L
Working Temperature
ºC
Suction Connection size
 inch
Discharge Connection size
 inch
Weight
kg
XD-010 10 200   0.37 2800 0.4 62 0.5 77 G1/2" G1/2" 16
XD-020 20 200   0.75 2880 0.4 63 0.5 77 G1/2" G1/2" 18
XD-020A 20 200   0.75 2880 0.4 63 0.5 77 G1/2" G1/2" 18
XD-020C 20 200   0.9 2880 0.4 65 0.5 79 G3/4" G3/4" 20
XD-025 25 200   0.75 2880 0.4 65 0.5 79 G3/4" G3/4" 20
XD-040C 40 50 200 1.1 1500 0.6 64 1.25 76 G1 1/4" G1 1/4" 48
XD-063C 63 50 200 1.5/2.2 1500 1 65 2 79 G1 1/4" G1 1/4" 58
XD-063D 63 50 200 1.5 1500 0.6 65 1.5 79 G1 1/4" G1 1/4" 49
XD-100C 100 50 200 2.2/3 1500 1.5 66 2 79 G1 1/4" G1 1/4" 72
XD-160C 160 50 200 4 1500 2.5 71 5 70 G2" G2" 158
XD-202C 200 50 200 4 1500 4 73 5 70 G2" G2" 158
XD-250C 250 50 200 5.5 1500 4.5 73 7 73 G2" G2" 195
XD-302C 300 50 200 5.5/7.5 1500 5 75 7 75 G2" G2" 211

Pulley Type

There are several types of pulleys. These include fixed pulleys, load multipliers and movable pulleys. Below is a description of each pulley type. A load multiplier is a special type of pulley with multiple wheels for increased lifting capacity. It is used in a wide range of applications including power transmission and construction. Some common uses of pulleys are listed below.

moving pulley

Movable pulleys work by transferring the weight of a load to another object of the same mass. Since a live pulley is inherently frictionless and weightless, the force required to lift a load with it is the same as the weight of the load. This principle applies to tall buildings and residences. It is an excellent choice for lifting heavy objects such as furniture and washing machines.
A pulley is a mechanical device with a wheel that rotates on a shaft. The axle is attached to the wheel and is usually fixed. The movable pulley can be fixed or movable, both of which can change the direction of the force on the rope. Some pulleys can also change the magnitude and direction of the force. They are ideal for a variety of applications, from lifting heavy objects to transporting objects.
Another type of movable pulley works by transmitting force to another object. It has a free axis and the total force provided by the rope tension is balanced. Since the tension on the rope is constant in each segment, pulling one end of the rope will double the force on the shaft, resulting in two mechanical advantages. This mechanical advantage is the main reason why movable pulleys are so versatile.
Another form of moving pulley is called a KWL diagram. The KWL diagram summarizes the basic concepts of the drive wheel. KWL diagrams are an excellent way to assess a student’s understanding of the concepts discussed in the course. Word questions are a great way to check whether students understand concepts. When students answer the word questions correctly, the answer is yes!
pulley

Fixed wheel pulley

If you need to move heavy objects, a single fixed wheel pulley is not a good choice. Using a single fixed pulley might be similar to using a handbag, but it’s not very convenient. This type of pulley system relies on friction to transmit motion. As a result, it can slip and isn’t always reliable. Fortunately, you can find other options that work just as well.
Fixed pulleys are the most basic type of pulley. They consist of grooved wheels and ropes attached to objects. These pulleys make lifting easier. Because the rope or cable only moves in one direction, the movement of the object feels lighter. And they are also easy to install. However, before you buy a fixed wheel pulley, make sure it is strong enough to support the weight of the load.
The disadvantages of fixed pulleys are obvious. One of them is the lack of mechanical advantage. A fixed pulley pulls up with the same force as a single moving pulley, and a single fixed pulley is not particularly effective as a force multiplier. However, the effect is more pronounced when you combine multiple fixed-wheel pulleys. You will get double the power! So what do fixed wheel pulleys have to offer?
Fixed wheel pulleys can be as small as a ring. A single ring pulley requires twice as much force as the weight being pulled. Adding more loops to the rope will reduce the effort required to pull the weight. The mechanical advantage of a fixed pulley is proportional to the number of strands running to the free pulley. A 100-pound pull on the free end will lift a 300-pound load.
pulley

composite pulley

Compound pulleys are pulleys that can be used to change the direction of a control wire. It can also be used to modify the mechanical force of the wire by moving the item it is connected to. In galleons, compound pulleys are more common. They are often combined with other ropes for mechanical advantage. Here are some common uses for composite pulleys.
The ideal mechanical advantage of a pulley is equal to the number of rope segments that pull up the load. This means that the more rope segments, the less force is required. A compound pulley will have the ideal mechanical advantage of 2, which means it will generate more force than a simple pulley. Composite pulleys are also more efficient at transmitting force because their number of rope segments is usually equal to the unit weight.
Composite pulley systems use more than two pulleys and ropes. More pulleys will reduce the force required to move heavier objects. They are usually used in large sailboats. The system is also used on construction sites. It can be used for a variety of applications, including lifting large objects or transmitting electricity. You can imagine how it would change your life if you had to move a large sailboat, but the result would be the same: a composite pulley system would make it easier to lift a large sailboat.
Composite pulleys are also known as fixed pulleys. The fixed pulley is stationary, and the movable pulley moves back and forth. The latter is more effective when used with a detachable cord or strap. On the other hand, a moving pulley is a moving pulley and it gives you a mechanical advantage. You can imagine this pulley on a flagpole.

load multiplier

The multiplication system has three basic parts: the rope grab, the connector, and the pulley. While some basic multipliers may combine the three parts, the concept remains the same. The multiplication system can make pulling the rope easier by reducing the amount of friction that occurs. Below are some examples of multiplication systems. A compact rope grab is a great option for resetting the multiplier.
The load reduction that a pulley system can achieve is proportional to the number of ropes used to support it. Although most utility pulley systems use only four ropes, the theoretical maximum load reduction is a quarter of the actual load. In other words, the four-wheel system only reduces the weight of a 1,000-pound load by a quarter. That would require 167 pounds of force, a far cry from the 500-pound load a single pulley system can achieve.
The mechanical advantage of a pulley system can be calculated by calculating the ratio between the forces exerted on each wire. For example, a 90-kilogram load is supported by three ropes, each weighing about thirty-five pounds. The ropes on pulleys A and B each carry a load of 60 kg. Using this formula, a single pulley system will yield a mechanical advantage over two tractors.
To calculate the force required to pull the rope over the pulley, measure the angle and deflection between the ropes. The deflection angle when added to the included angle should equal 180 degrees. A 75 degree angle requires 159% of the load force. This means a total load multiplier of four. This formula is an important tool for calculating the force multiple of the pulley.
pulley

Disadvantages of fixed pulleys

There are two basic types of pulleys: movable and fixed. Active pulleys are more advanced, allowing the pulley to move according to the load. They reduce the force required to lift the load. Active roller pulleys are more compact and therefore take up less space. Both types are good for lifting heavier objects, but they each have their pros and cons.
Fixed wheel pulleys can be used to lift heavy objects. This type of pulley consists of a wheel with a fixed shaft that has grooves on its edges for guiding ropes or cables. This is a simple machine as no motor or engine is required to lift objects. When two or more wheels are used together, the ropes around the wheels form a powerful hoist.
Single wheel pulleys are not suitable for lifting. They tend to push things down. Also, they are unreliable because they rely on friction and can slip. Also, a single wheel pulley would require a lot of space. Another disadvantage of fixed-wheel pulleys is that they make it difficult to move heavy objects easily. Single fixed-wheel pulleys also tend to slip easily, making them a poor choice for many applications.
Fixed wheel pulleys are also easier to install and maintain than manually operated ones. It requires less space and lubrication than manual pulleys. Manual pulleys can cause injury because the operator will be lifting the full weight of the heavy object. Additionally, rope slippage can lead to muscle strains and rope burns. And the system requires frequent maintenance.

China Xd-100c 2.2kw 3kw 100m3/H Rotary Vane Vacuum Pump     pulley system	China Xd-100c 2.2kw 3kw 100m3/H Rotary Vane Vacuum Pump     pulley system
editor by czh 2022-11-26